Is Mold Removal Your Biggest Challenge Right Now?

Mold infestation is one of the most common problems reported by homeowners. This moisture-loving fungus thrives with ease on virtually every damp surface. It doesn't matter where, whether it's indoors or outdoors. Other than dampness, other conditions that precipitate mold infestation include poor ventilation, warmth, and poor lighting.


Molds are known to produce an unpleasant odor, and can trigger allergic reactions. Some people have even reportedly developed asthma attacks from this fungus. Mold removal, especially on the exterior of a home, can be a challenging and intimidating affair.


There's not much to worry about though, because there are still things that you can do to protect your home against an infestation. Generally, if you have a handle on any water problems and have moisture control, then you are halfway there. Here are a few tips to help you safely deal with a mold problem on the outside of your home.

1. Moisture Elimination

Moisture is the greatest factor when it comes to mold growth. Mold loves moisture and will easily flourish in warm and humid conditions. For that reason, keeping moisture in check goes a long way towards eliminating mold from your home.


Needless to say, it is pointless to remove mold without fixing your water problems, as it is bound to grow back. So how do you go about this?


For starters, gutters are a contributing element that should be taken care of. Make sure that all gutters drain water a considerable distance away from your house, at least 6 feet. This ensures that the water does not splash back on the walls, causing dampness.


Also, make sure that the gutters are free from debris, which tends to pool water, and can significantly build up moisture levels. Clearing leaves off of the roof also helps to lessen the risk of clogged gutters. If you're going to hire a pressure washing company, you could also have them take care of the gutters for you while they're there.


Seal off any cracks in your walkway with the use of appropriate fillers, ones that are water-resistant, preferably. This prevents water seepage and inhibits mold growth.


Trim off overhanging tree branches and keep your house free from leaves that tend to accumulate, especially near the walls. This ensures that the roof and walls of your home dry out faster, which will reduce dampness on both.

2. Cleaning Solutions

There is quite a variety of cleaning solutions to choose from, and they are readily available in your local stores. Bleach is a well-known mold killer, and as a result, it is a favorite component of most commercial mold killing products.


It kills molds on contact and destroys spores as well, completely destroying their chances of growing back. However, it only kills mold on non-porous surfaces, as it cannot penetrate deep into some materials to reach the mold growing underneath.


Borax, a boron-based solution, makes for a great general cleaning agent and deodorizer. It kills and inhibits mold growth, and conveniently, does this in a chemical-free and safe manner.


Vinegar is also another key component in most mold-killing products. It can be a jack of many trades. It is a safe and effective option for killing mold, and can also be found in your local supermarkets.


These solutions can be formulated, put in a spray bottle, and sprayed on affected areas. It will only be a matter of time before results can be seen.

3. Mold-Resistant Building Materials

For areas where moisture is constantly a problem, especially on the outside, consider rebuilding or replacing the areas with mold and water-resistant materials. For instance, if you are using wood, go for the pressure-treated one.


Paint the walls with mold-resistant paint, or add a mildewcide to your paint. They can be found in your local home improvement stores. You can also put mildewcide and bleach in your pressure washer, let it soak for a minute, and then slowly rinse it with water, if that's what you're using.

4. Get Professional Help

Sometimes, when the infestation seems to want to stick around, it will be time to bring in the big guns. Professional pressure washing companies will offer expert mold control, and will help to cut out the mold infestation right at the root.


As much as doing it yourself might sound like a good idea, sometimes you may not do it efficiently. Always find a reputable expert and have them comprehensively assess the extent of your infestation, and recommend remediation measures.


Make sure, though, that the pressure washing company employees don't rush to do the job. If there's high pressure water being sprayed for too long, the paint on your house could chip off.